Deep Lithospheric StructureThis service represents models of the structure and composition of the lithospheric mantle. The service currently delivers grids generated from modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform.LitrhosphereAsthenosphereMantleLitModurn:ogc:service:wcs2.0.11.1.11.1.0http://www.opengis.net/spec/WCS/2.0/conf/corehttp://www.opengis.net/spec/WCS_protocol-binding_get-kvp/1.0.1http://www.opengis.net/spec/WCS_protocol-binding_post-xml/1.0http://www.opengis.net/spec/WCS_service-extension_crs/1.0/conf/crs-gridded-coveragehttp://www.opengis.net/spec/GMLCOV/1.0/conf/gml-coveragehttp://www.opengis.net/spec/GMLCOV/1.0/conf/special-formathttp://www.opengis.net/spec/GMLCOV/1.0/conf/multiparthttp://www.opengis.net/spec/WCS_service-extension_scaling/1.0/conf/scalinghttp://www.opengis.net/spec/WCS_service-extension_crs/1.0/conf/crshttp://www.opengis.net/spec/WCS_service-extension_interpolation/1.0/conf/interpolationhttp://www.opengis.net/spec/WCS_service-extension_interpolation/1.0/conf/interpolation-per-axishttp://www.opengis.net/spec/WCS_service-extension_interpolation/1.0/conf/nearest-neighborhttp://www.opengis.net/spec/WCS_service-extension_interpolation/1.0/conf/linearhttp://www.opengis.net/spec/WCS_service-extension_interpolation/1.0/conf/cubichttp://www.opengis.net/spec/WCS_service-extension_range-subsetting/1.0/conf/record-subsettingNONE© Commonwealth of Australia (Geoscience Australia) 2024. This product is released under the Creative Commons Attribution 4.0 International LicenceGeoscience AustraliaClient Services+61 2 6249 9111+61 2 6249 9999GPO Box 378CanberraACT2601Australiaclientservices@ga.gov.auXMLapplication/gml+xmlimage/jpegimage/pngimage/tiffimage/tiff;application=geotifftext/plainhttp://www.opengis.net/def/crs/EPSG/0/4283http://www.opengis.net/def/crs/EPSG/0/4326http://www.opengis.net/def/crs/EPSG/0/3857http://www.opengis.net/def/crs/EPSG/0/7844http://www.opengis.net/def/crs/EPSG/0/7845http://www.opengis.net/def/crs/EPSG/0/20248http://www.opengis.net/def/crs/EPSG/0/20249http://www.opengis.net/def/crs/EPSG/0/20250http://www.opengis.net/def/crs/EPSG/0/20251http://www.opengis.net/def/crs/EPSG/0/20252http://www.opengis.net/def/crs/EPSG/0/20253http://www.opengis.net/def/crs/EPSG/0/20254http://www.opengis.net/def/crs/EPSG/0/20255http://www.opengis.net/def/crs/EPSG/0/20256http://www.opengis.net/def/crs/EPSG/0/20257http://www.opengis.net/def/crs/EPSG/0/20258http://www.opengis.net/def/crs/EPSG/0/28348http://www.opengis.net/def/crs/EPSG/0/28349http://www.opengis.net/def/crs/EPSG/0/28350http://www.opengis.net/def/crs/EPSG/0/28351http://www.opengis.net/def/crs/EPSG/0/28352http://www.opengis.net/def/crs/EPSG/0/28353http://www.opengis.net/def/crs/EPSG/0/28354http://www.opengis.net/def/crs/EPSG/0/28355http://www.opengis.net/def/crs/EPSG/0/28356http://www.opengis.net/def/crs/EPSG/0/28357http://www.opengis.net/def/crs/EPSG/0/28358http://www.opengis.net/def/crs/EPSG/0/32748http://www.opengis.net/def/crs/EPSG/0/32749http://www.opengis.net/def/crs/EPSG/0/32750http://www.opengis.net/def/crs/EPSG/0/32751http://www.opengis.net/def/crs/EPSG/0/32752http://www.opengis.net/def/crs/EPSG/0/32753http://www.opengis.net/def/crs/EPSG/0/32754http://www.opengis.net/def/crs/EPSG/0/32755http://www.opengis.net/def/crs/EPSG/0/32756http://www.opengis.net/def/crs/EPSG/0/32757http://www.opengis.net/def/crs/EPSG/0/32758http://www.opengis.net/def/crs/EPSG/0/3110http://www.opengis.net/def/crs/EPSG/0/3111http://www.opengis.net/def/crs/EPSG/0/3112http://www.opengis.net/def/interpolation/OGC/1/nearest-neighborhttp://www.opengis.net/def/interpolation/OGC/1/linearhttp://www.opengis.net/def/interpolation/OGC/1/cubicCrustal Properties Bulk Heat Production (Median) - Version 1 (KY22)This grid provides the bulk heat production of the upper crust from the median of the posterior ensemble of LitMod models. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelBulk Crustal Heat Productionlitmod1__crust_props_bulk_heat_prod_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Bulk Heat Production (Median) - Version 2 (FR23)This grid provides the bulk heat production of the upper crust from the median of the posterior ensemble of LitMod models. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelBulk Crustal Heat Productionlitmod2__crust_props_bulk_heat_prod_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Bulk Heat Production (St Dev) - Version 1 (KY22)This grid provides the standard deviation in the bulk heat production of the upper crust from the posterior ensemble of LitMod models. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelBulk Crustal Heat Productionlitmod1__crust_props_bulk_heat_prod_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Bulk Heat Production (St Dev) - Version 2 (FR23)This grid provides the standard deviation in the bulk heat production of the upper crust from the posterior ensemble of LitMod models. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelBulk Crustal Heat Productionlitmod2__crust_props_bulk_heat_prod_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Density Layer 1 (Median) - Version 1 (KY22)This grid provides the density for the first crustal layer (here, defined as the sedimentary overburden) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelDensity Crustal Layerlitmod1__crust_props_density_layer_1_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Density Layer 1 (Median) - Version 2 (FR23)This grid provides the density for the first crustal layer (here, defined as the sedimentary overburden) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelDensity Crustal Layerlitmod2__crust_props_density_layer_1_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Density Layer 1 (St Dev) - Version 1 (KY22)This grid provides the standard deviation of the density for the first crustal layer (here, defined as the sedimentary overburden) from the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelDensity Crustal Layerlitmod1__crust_props_density_layer_1_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Density Layer 1 (St Dev) - Version 2 (FR23)This grid provides the standard deviation of the density for the first crustal layer (here, defined as the sedimentary overburden) from the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelDensity Crustal Layerlitmod2__crust_props_density_layer_1_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Density Layer 2 (Median) - Version 1 (KY22)This grid provides the density for the second crustal layer (here, defined as the upper crust) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelDensity Crustal Layerlitmod1__crust_props_density_layer_2_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Density Layer 2 (Median) - Version 2 (FR23)This grid provides the density for the second crustal layer (here, defined as the upper crust) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelDensity Crustal Layerlitmod2__crust_props_density_layer_2_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Density Layer 2 (St Dev) - Version 1 (KY22)This grid provides the standard deviation of the density for the second crustal layer (here, defined as the upper crust) from the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelDensity Crustal Layerlitmod1__crust_props_density_layer_2_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Density Layer 2 (St Dev) - Version 2 (FR23)This grid provides the standard deviation of the density for the second crustal layer (here, defined as the upper crust) from the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelDensity Crustal Layerlitmod2__crust_props_density_layer_2_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Density Layer 3 (Median) - Version 1 (KY22)This grid provides the density for the third crustal layer (here, defined as the lower crust) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelDensity Crustal Layerlitmod1__crust_props_density_layer_3_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Density Layer 3 (Median) - Version 2 (FR23)This grid provides the density for the third crustal layer (here, defined as the lower crust) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelDensity Crustal Layerlitmod2__crust_props_density_layer_3_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Density Layer 3 (St Dev) - Version 1 (KY22)This grid provides the standard deviation of the density for the third crustal layer (here, defined as the lower crust) from the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelDensity Crustal Layerlitmod1__crust_props_density_layer_3_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Density Layer 3 (St Dev) - Version 2 (FR23)This grid provides the standard deviation of the density for the third crustal layer (here, defined as the lower crust) from the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelDensity Crustal Layerlitmod2__crust_props_density_layer_3_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Depth Layer 1 (Median) - Version 1 (KY22)This grid provides the depth to the base of the first crustal layer (here, defined as the sedimentary overburden) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the Phanerozoic OZ SEEBASE model (Frogtech, 2005). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelCrustal Depthlitmod1__crust_props_depth_layer1_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Depth Layer 1 (Median) - Version 2 (FR23)This grid provides the depth to the base of the first crustal layer (here, defined as the sedimentary overburden) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the Phanerozoic OZ SEEBASE model (Frogtech, 2005). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelCrustal Depthlitmod2__crust_props_depth_layer1_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Depth Layer 1 (St Dev) - Version 1 (KY22)This grid provides the standard deviation of the depth to the base of the first crustal layer (here, defined as the sedimentary overburden) from the posterior ensemble of LitMod models. The initial reference model is based on the Phanerozoic OZ SEEBASE model (Frogtech, 2005). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelCrustal Depthlitmod1__crust_props_depth_layer1_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Depth Layer 1 (St Dev) - Version 2 (FR23)This grid provides the standard deviation of the depth to the base of the first crustal layer (here, defined as the sedimentary overburden) from the posterior ensemble of LitMod models. The initial reference model is based on the Phanerozoic OZ SEEBASE model (Frogtech, 2005). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelCrustal Depthlitmod2__crust_props_depth_layer1_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Depth Layer 2 (Median) - Version 1 (KY22)This grid provides the depth to the base of the second crustal layer (here, defined as the upper crust) from the median of the posterior ensemble of LitMod models. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelCrustal Depthlitmod1__crust_props_depth_layer2_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Depth Layer 2 (Median) - Version 2 (FR23)This grid provides the depth to the base of the second crustal layer (here, defined as the upper crust) from the median of the posterior ensemble of LitMod models. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelCrustal Depthlitmod2__crust_props_depth_layer2_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Depth Layer 2 (St Dev) - Version 1 (KY22)This grid provides the standard deviation in the depth to the base of the second crustal layer (here, defined as the upper crust) from the posterior ensemble of LitMod models. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelCrustal Depthlitmod1__crust_props_depth_layer2_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Depth Layer 2 (St Dev) - Version 2 (FR23)This grid provides the standard deviation in the depth to the base of the second crustal layer (here, defined as the upper crust) from the posterior ensemble of LitMod models. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelCrustal Depthlitmod2__crust_props_depth_layer2_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Depth Layer 3 (Median) - Version 1 (KY22)This grid provides the depth to the base of the third crustal layer (here, defined as the lower crust) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the AusMoho2012 model (Salmon et al., 2013). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelCrustal Depthlitmod1__crust_props_depth_layer3_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Depth Layer 3 (Median) - Version 2 (FR23)This grid provides the depth to the base of the third crustal layer (here, defined as the lower crust) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the AusMoho2012 model (Salmon et al., 2013). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelCrustal Depthlitmod2__crust_props_depth_layer3_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Depth Layer 3 (St Dev) - Version 1 (KY22)This grid provides the standard deviation in the depth to the base of the third crustal layer (here, defined as the lower crust) from the posterior ensemble of LitMod models. The initial reference model is based on the AusMoho2012 model (Salmon et al., 2013). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelCrustal Depthlitmod1__crust_props_depth_layer3_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Depth Layer 3 (St Dev) - Version 2 (FR23)This grid provides the standard deviation in the depth to the base of the third crustal layer (here, defined as the lower crust) from the posterior ensemble of LitMod models. The initial reference model is based on the AusMoho2012 model (Salmon et al., 2013). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelCrustal Depthlitmod2__crust_props_depth_layer3_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Vp-Vs Ratio Layer 1 (Median) - Version 1 (KY22)This grid provides the ratio of compressional-to-shear wave velocity (Vp/Vs) for the first crustal layer (here, defined as the sedimentary overburden) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelVp-Vs Ratiolitmod1__crust_props_Vp-Vs_ratio_layer1_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Vp-Vs Ratio Layer 1 (Median) - Version 2 (FR23)This grid provides the ratio of compressional-to-shear wave velocity (Vp/Vs) for the first crustal layer (here, defined as the sedimentary overburden) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelVp-Vs Ratiolitmod2__crust_props_Vp-Vs_ratio_layer1_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Vp-Vs Ratio Layer 1 (St Dev) - Version 1 (KY22)This grid provides the standard deviation in the ratio of compressional-to-shear wave velocity (Vp/Vs) for the first crustal layer (here, defined as the sedimentary overburden) from the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelVp-Vs Ratiolitmod1__crust_props_Vp-Vs_ratio_layer1_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Vp-Vs Ratio Layer 1 (St Dev) - Version 2 (FR23)This grid provides the standard deviation in the ratio of compressional-to-shear wave velocity (Vp/Vs) for the first crustal layer (here, defined as the sedimentary overburden) from the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelVp-Vs Ratiolitmod2__crust_props_Vp-Vs_ratio_layer1_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Vp-Vs Ratio Layer 2 (Median) - Version 1 (KY22)This grid provides the ratio of compressional-to-shear wave velocity (Vp/Vs) for the second crustal layer (here, defined as the upper crust) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelVp-Vs Ratiolitmod1__crust_props_Vp-Vs_ratio_layer2_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Vp-Vs Ratio Layer 2 (Median) - Version 2 (FR23)This grid provides the ratio of compressional-to-shear wave velocity (Vp/Vs) for the second crustal layer (here, defined as the upper crust) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelVp-Vs Ratiolitmod2__crust_props_Vp-Vs_ratio_layer2_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Vp-Vs Ratio Layer 2 (St Dev) - Version 1 (KY22)This grid provides the standard deviation in the ratio of compressional-to-shear wave velocity (Vp/Vs) for the second crustal layer (here, defined as the upper crust) from the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelVp-Vs Ratiolitmod1__crust_props_Vp-Vs_ratio_layer2_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Vp-Vs Ratio Layer 2 (St Dev) - Version 2 (FR23)This grid provides the standard deviation in the ratio of compressional-to-shear wave velocity (Vp/Vs) for the second crustal layer (here, defined as the upper crust) from the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelVp-Vs Ratiolitmod2__crust_props_Vp-Vs_ratio_layer2_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Vp-Vs Ratio Layer 3 (Median) - Version 1 (KY22)This grid provides the ratio of compressional-to-shear wave velocity (Vp/Vs) for the third crustal layer (here, defined as the lower crust) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelVp-Vs Ratiolitmod1__crust_props_Vp-Vs_ratio_layer3_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Vp-Vs Ratio Layer 3 (Median) - Version 2 (FR23)This grid provides the ratio of compressional-to-shear wave velocity (Vp/Vs) for the third crustal layer (here, defined as the lower crust) from the median of the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelVp-Vs Ratiolitmod2__crust_props_Vp-Vs_ratio_layer3_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Vp-Vs Ratio Layer 3 (St Dev) - Version 1 (KY22)This grid provides the standard deviation in the ratio of compressional-to-shear wave velocity (Vp/Vs) for the third crustal layer (here, defined as the lower crust) from the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelVp-Vs Ratiolitmod1__crust_props_Vp-Vs_ratio_layer3_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Crustal Properties Vp-Vs Ratio Layer 3 (St Dev) - Version 2 (FR23)This grid provides the standard deviation in the ratio of compressional-to-shear wave velocity (Vp/Vs) for the third crustal layer (here, defined as the lower crust) from the posterior ensemble of LitMod models. The initial reference model is based on the AuSREM model (Salmon et al., 2012). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelVp-Vs Ratiolitmod2__crust_props_Vp-Vs_ratio_layer3_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Elevation Misfit - Version 1 (KY22)This grid provides the misfit between input elevation grid and the median posterior model prediction, misfit is measured as the median negative log-likelihood (NLL) from the posterior ensemble of possible solutions. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModNegative Log-likelihoodElevationMisfitlitmod1__elevation_misfitRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Elevation Misfit - Version 2 (FR23)This grid provides the misfit between input elevation grid and the median posterior model prediction, misfit is measured as the median negative log-likelihood (NLL) from the posterior ensemble of possible solutions. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModNegative Log-likelihoodElevationMisfitlitmod2__elevation_misfitRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Geoid Misfit - Version 1 (KY22)This grid provides the misfit between input geoid surface and the median posterior model prediction. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModGeoidMisfitNegative Log-likelihoodlitmod1__geoid_misfitRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Geoid Misfit - Version 2 (FR23)This grid provides the misfit between input geoid surface and the median posterior model prediction. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModGeoidMisfitNegative Log-likelihoodlitmod2__geoid_misfitRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Geotherm Temperature at 410 km (Median) - Version 1 (KY22)This grid provides the temperature at 410 km depth based on the median of the posterior ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelTemperaturelitmod1__geotherm_temp_410km_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Geotherm Temperature at 410 km (Median) - Version 2 (FR23)This grid provides the temperature at 410 km depth based on the median of the posterior ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelTemperaturelitmod2__geotherm_temp_410km_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Geotherm Temperature at 410 km (St Dev) - Version 1 (KY22)This grid provides the standard deviation of the temperature at 410 km depth based on the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelTemperaturelitmod1__geotherm_temp_410km_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Geotherm Temperature at 410 km (St Dev) - Version 2 (FR23)This grid provides the standard deviation of the temperature at 410 km depth based on the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelTemperaturelitmod2__geotherm_temp_410km_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Geotherm Temperature at Node 11 (St Dev) - Version 1 (KY22)This grid provides the standard deviation in the geotherm temperature at the 11th LitMod modelling node based on the posterior ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelTemperaturelitmod1__geotherm_temp_node11_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Geotherm Temperature at Node 11 (St Dev) - Version 2 (FR23)This grid provides the standard deviation in the geotherm temperature at the 11th LitMod modelling node based on the posterior ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelTemperaturelitmod2__geotherm_temp_node11_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Geotherm Temperature at Node 11 (median) - Version 1 (KY22)This grid provides the geotherm temperature at the 11th LitMod modelling node based on the median of the posterior ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelTemperaturelitmod1__geotherm_temp_node11_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Geotherm Temperature at Node 11 (median) - Version 2 (FR23)This grid provides the geotherm temperature at the 11th LitMod modelling node based on the median of the posterior ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelTemperaturelitmod2__geotherm_temp_node11_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Geotherm Temperature at Sublithospheric Node (Median) - Version 1 (KY22)This grid provides the geotherm temperature at the sublithospheric LitMod modelling node based on the median of the posterior ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelTemperaturelitmod1__geotherm_temp_sublith_node_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Geotherm Temperature at Sublithospheric Node (Median) - Version 2 (FR23)This grid provides the geotherm temperature at the sublithospheric LitMod modelling node based on the median of the posterior ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelTemperaturelitmod2__geotherm_temp_sublith_node_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Geotherm Temperature at Sublithospheric Node (St Dev) - Version 1 (KY22)This grid provides the standard deviation of the geotherm temperature at the 11th LitMod modelling node based on the posterior ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelTemperaturelitmod1__geotherm_temp_sublith_node_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Geotherm Temperature at Sublithospheric Node (St Dev) - Version 2 (FR23)This grid provides the standard deviation of the geotherm temperature at the 11th LitMod modelling node based on the posterior ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelTemperaturelitmod2__geotherm_temp_sublith_node_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Heat Flow Misfit - Version 1 (KY22)This grid provides the misfit between input surface heat flow and the median posterior model prediction. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModNegative Log-likelihoodHeat FlowMisfitlitmod1__heat_flow_misfitRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Heat Flow Misfit - Version 2 (FR23)This grid provides the misfit between input surface heat flow and the median posterior model prediction. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModNegative Log-likelihoodHeat FlowMisfitlitmod2__heat_flow_misfitRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Elevation - Version 1 (KY22)This grid provides the input elevation surface based on Whiteway (2009). Measured in meters. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModInputElevationMisfitlitmod1__input_elevationRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Elevation - Version 2 (FR23)This grid provides the input elevation surface based on Whiteway (2009). Measured in meters. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModInputElevationMisfitlitmod2__input_elevationRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Geoid Anomaly - Version 1 (KY22)This grid provides the input geoid anomaly surface based on the LithoRef18 model of Afonso et al. (2019). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModMisfitInputGeoidlitmod1__geoid_inputRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Geoid Anomaly - Version 2 (FR23)This grid provides the input geoid anomaly surface based on the LithoRef18 model of Afonso et al. (2019). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModMisfitInputGeoidlitmod2__geoid_inputRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Heat Flow - Version 1 (KY22)This grid provides the input surface heat flow field based on a tension-in-spline interpolation of available heat flow determinations from the International Heat Flow Commission global database (Fuchs et al., 2021). The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModHeat FlowInputMisfitlitmod1__input_heat_flowRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Heat Flow - Version 2 (FR23)This grid provides the input surface heat flow field based on a tension-in-spline interpolation of available heat flow determinations from the International Heat Flow Commission global database (Fuchs et al., 2021). The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModHeat FlowInputMisfitlitmod2__input_heat_flowRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 100.0s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 100.0s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0909-1000RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 102.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 102.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0930-1020RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 111.1s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 111.1s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_1000-1111RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 113.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 113.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_1020-1130RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 125.0s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 125.0s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_1111-1250RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 142.9s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 142.9s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_1250-1429RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 166.7s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 166.7s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_1429-1667RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 20.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 20.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0180-0200RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 22.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 22.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0200-0220RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 24.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 24.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0220-0240RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 25.0s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 25.0s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0220-0250RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 26.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 26.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0240-0260RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 27.8s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 27.8s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0250-0278RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 29.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 29.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0260-0290RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 30.3s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 30.3s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0278-0303RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 31.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 31.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0290-0310RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 33.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 33.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0310-0330RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 33.3s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 33.3s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0303-0333RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 35.7s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 35.7s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0333-0357RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 37.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 37.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0330-0370RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 40.0s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 40.0s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0357-0400RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 41.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 41.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0370-0410RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 45.5s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 45.5s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0400-0455RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 47.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 47.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0410-0470RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 50.0s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 50.0s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0455-0500RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 51.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 51.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0470-0510RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 55.6s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 55.6s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0500-0556RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 57.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 57.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0510-0570RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 62.5s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 62.5s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0556-0625RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 64.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 64.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0570-0640RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 66.7s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 66.7s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0625-0667RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 68.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 68.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0640-0680RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 71.4s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 71.4s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0667-0714RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 73.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 73.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0680-0730RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 76.9s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 76.9s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0714-0769RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 79.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 79.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0730-0790RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 83.3s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 83.3s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0769-0833RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 85.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 85.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0790-0850RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 90.9s period - Version 1 (KY22)This grid provides the input Rayleigh phase velocity (Vs) at 90.9s period, based on the surface wave tomography of Yoshizawa (2014). The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod1__rayleigh_disp_input_Vs_0833-0909RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Input Rayleigh phase velocity (Vs) at 93.0s period - Version 2 (FR23)This grid provides the input Rayleigh phase velocity (Vs) at 93.0s period, based on the surface wave tomography of Fishwick & Rawlinson (2012). The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesInputVslitmod2__rayleigh_disp_input_Vs_0850-0930RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0LAB Depth (Median) - Version 1 (KY22)This grid provides the depth of the lithosphere-asthenosphere boundary (LAB), here defined as the 1250°C isotherm, based on the median of the posterior ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelLABDepthlitmod1__LAB_depth_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0LAB Depth (Median) - Version 2 (FR23)This grid provides the depth of the lithosphere-asthenosphere boundary (LAB), here defined as the 1250°C isotherm, based on the median of the posterior ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelLABDepthlitmod2__LAB_depth_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0LAB Depth (St Dev) - Version 1 (KY22)This grid provides the standard deviation in the depth of the lithosphere-asthenosphere boundary (LAB), here defined as the 1250°C isotherm, based on the posterior ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelLABDepthlitmod1__LAB_depth_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0LAB Depth (St Dev) - Version 2 (FR23)This grid provides the standard deviation in the depth of the lithosphere-asthenosphere boundary (LAB), here defined as the 1250°C isotherm, based on the posterior ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelLABDepthlitmod2__LAB_depth_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Grain Size (Median) - Version 1 (KY22)This grid provides the mineral grain size in the mantle based on the median of the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleGrain Sizelitmod1__mantle_props_grain_size_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Grain Size (Median) - Version 2 (FR23)This grid provides the mineral grain size in the mantle based on the median of the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleGrain Sizelitmod2__mantle_props_grain_size_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Grain Size (St Dev) - Version 1 (KY22)This grid provides the standard deviation of the mineral grain size in the mantle based on the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleGrain Sizelitmod1__mantle_props_grain_size_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Grain Size (St Dev) - Version 2 (FR23)This grid provides the standard deviation of the mineral grain size in the mantle based on the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleGrain Sizelitmod2__mantle_props_grain_size_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric Al₂O₃ (Median) - Version 1 (KY22)This grid provides the Al₂O₃ composition of the lithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric Al₂O₃litmod1__mantle_props_lithospheric_Al2O3_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric Al₂O₃ (Median) - Version 2 (FR23)This grid provides the Al₂O₃ composition of the lithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric Al₂O₃litmod2__mantle_props_lithospheric_Al2O3_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric Al₂O₃ (St Dev) - Version 1 (KY22)This grid provides the standard deviation in the bulk Al₂O₃ composition of the lithospheric mantle based on the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric Al₂O₃litmod1__mantle_props_lithospheric_Al2O3_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric Al₂O₃ (St Dev) - Version 2 (FR23)This grid provides the standard deviation in the bulk Al₂O₃ composition of the lithospheric mantle based on the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric Al₂O₃litmod2__mantle_props_lithospheric_Al2O3_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric CaO (Median) - Version 1 (KY22)This grid provides the bulk CaO composition of the lithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric CaOlitmod1__mantle_props_lithospheric_CaO_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric CaO (Median) - Version 2 (FR23)This grid provides the bulk CaO composition of the lithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric CaOlitmod2__mantle_props_lithospheric_CaO_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric CaO (St Dev) - Version 1 (KY22)This grid provides the standard deviation in the bulk CaO composition of the lithospheric mantle based on the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric CaOlitmod1__mantle_props_lithospheric_CaO_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric CaO (St Dev) - Version 2 (FR23)This grid provides the standard deviation in the bulk CaO composition of the lithospheric mantle based on the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric CaOlitmod2__mantle_props_lithospheric_CaO_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric FeO (Median) - Version 1 (KY22)This grid provides the bulk FeO composition of the lithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric FeOlitmod1__mantle_props_lithospheric_FeO_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric FeO (Median) - Version 2 (FR23)This grid provides the bulk FeO composition of the lithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric FeOlitmod2__mantle_props_lithospheric_FeO_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric FeO (St Dev) - Version 1 (KY22)This grid provides the standard deviation of the bulk FeO composition of the lithospheric mantle based on the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric FeOlitmod1__mantle_props_lithospheric_FeO_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric FeO (St Dev) - Version 2 (FR23)This grid provides the standard deviation of the bulk FeO composition of the lithospheric mantle based on the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric FeOlitmod2__mantle_props_lithospheric_FeO_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric MgO (Median) - Version 1 (KY22)This grid provides the bulk MgO composition of the lithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric MgOlitmod1__mantle_props_lithospheric_MgO_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric MgO (Median) - Version 2 (FR23)This grid provides the bulk MgO composition of the lithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric MgOlitmod2__mantle_props_lithospheric_MgO_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric MgO (St Dev) - Version 1 (KY22)This grid provides the standard deviation of the bulk MgO composition of the lithospheric mantle based on the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric MgOlitmod1__mantle_props_lithospheric_MgO_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Lithospheric MgO (St Dev) - Version 2 (FR23)This grid provides the standard deviation of the bulk MgO composition of the lithospheric mantle based on the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleLithospheric MgOlitmod2__mantle_props_lithospheric_MgO_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric Al₂O₃ (Median) - Version 1 (KY22)This grid provides the bulk Al₂O₃ composition of the sublithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric Al₂O₃litmod1__mantle_props_sublithospheric_Al2O3_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric Al₂O₃ (Median) - Version 2 (FR23)This grid provides the bulk Al₂O₃ composition of the sublithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric Al₂O₃litmod2__mantle_props_sublithospheric_Al2O3_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric Al₂O₃ (St Dev) - Version 1 (KY22)This grid provides the standard deviation in the bulk Al₂O₃ composition of the sublithospheric mantle based on the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric Al₂O₃litmod1__mantle_props_sublithospheric_Al2O3_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric Al₂O₃ (St Dev) - Version 2 (FR23)This grid provides the standard deviation in the bulk Al₂O₃ composition of the sublithospheric mantle based on the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric Al₂O₃litmod2__mantle_props_sublithospheric_Al2O3_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric CaO (Median) - Version 1 (KY22)This grid provides the bulk CaO composition of the sublithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric CaOlitmod1__mantle_props_sublithospheric_CaO_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric CaO (Median) - Version 2 (FR23)This grid provides the bulk CaO composition of the sublithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric CaOlitmod2__mantle_props_sublithospheric_CaO_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric CaO (St Dev) - Version 1 (KY22)This grid provides the standard deviation of the bulk CaO composition of the sublithospheric mantle based on the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric CaOlitmod1__mantle_props_sublithospheric_CaO_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric CaO (St Dev) - Version 2 (FR23)This grid provides the standard deviation of the bulk CaO composition of the sublithospheric mantle based on the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric CaOlitmod2__mantle_props_sublithospheric_CaO_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric FeO (Median) - Version 1 (KY22)This grid provides the bulk Al₂O₃ composition of the sublithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric FeOlitmod1__mantle_props_sublithospheric_FeO_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric FeO (Median) - Version 2 (FR23)This grid provides the bulk Al₂O₃ composition of the sublithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric FeOlitmod2__mantle_props_sublithospheric_FeO_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric FeO (St Dev) - Version 1 (KY22)This grid provides the standard deviation of the bulk FeO composition of the sublithospheric mantle based on the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric FeOlitmod1__mantle_props_sublithospheric_FeO_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric FeO (St Dev) - Version 2 (FR23)This grid provides the standard deviation of the bulk FeO composition of the sublithospheric mantle based on the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric FeOlitmod2__mantle_props_sublithospheric_FeO_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric MgO (Median) - Version 1 (KY22)This grid provides the bulk MgO composition of the sublithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric MgOlitmod1__mantle_props_sublithospheric_MgO_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric MgO (Median) - Version 2 (FR23)This grid provides the bulk MgO composition of the sublithospheric mantle based on the median of the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric MgOlitmod2__mantle_props_sublithospheric_MgO_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric MgO (St Dev) - Version 1 (KY22)This grid provides the standard deviation of the bulk MgO composition of the sublithospheric mantle based on the posterior model ensemble. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric MgOlitmod1__mantle_props_sublithospheric_MgO_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Mantle Properties Sublithospheric MgO (St Dev) - Version 2 (FR23)This grid provides the standard deviation of the bulk MgO composition of the sublithospheric mantle based on the posterior model ensemble. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPosterior ModelMantleSublithospheric MgOlitmod2__mantle_props_sublithospheric_MgO_stdevRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 100.0s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 100.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0909-1000RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 102.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 102.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0930-1020RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 111.1s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 111.1s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_1000-1111RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 113.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 113.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_1020-1130RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 125.0s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 125.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_1111-1250RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 142.9s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 142.9s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_1250-1429RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 166.7s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 166.7s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_1429-1667RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 20.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 20.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0180-0200RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 22.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 22.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0200-0220RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 24.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 24.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0220-0240RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 25.0s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 25.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0220-0250RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 26.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 26.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0240-0260RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 27.8s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 27.8s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0250-0278RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 29.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 29.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0260-0290RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 30.3s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 30.3s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0278-0303RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 31.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 31.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0290-0310RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 33.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 33.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0310-0330RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 33.3s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 33.3s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0303-0333RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 35.7s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 35.7s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0333-0357RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 37.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 37.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0330-0370RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 40.0s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 40.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0357-0400RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 41.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 41.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0370-0410RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 45.5s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 45.5s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0400-0455RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 47.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 47.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0410-0470RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 50.0s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 50.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0455-0500RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 51.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 51.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0470-0510RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 55.6s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 55.6s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0500-0556RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 57.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 57.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0510-0570RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 62.5s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 62.5s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0556-0625RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 64.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 64.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0570-0640RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 66.7s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 66.7s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0625-0667RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 68.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 68.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0640-0680RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 71.4s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 71.4s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0667-0714RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 73.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 73.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0680-0730RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 76.9s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 76.9s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0714-0769RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 79.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 79.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0730-0790RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 83.3s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 83.3s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0769-0833RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 85.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 85.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0790-0850RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 90.9s period - Version 1 (KY22)This grid provides the misfit in Rayleigh phase velocities (Vs) at 90.9s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod1__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0833-0909RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Median Vs misfit at 93.0s period - Version 2 (FR23)This grid provides the misfit in Rayleigh phase velocities (Vs) at 93.0s period. Here, misfit is measured as the median negative log-likelihood from the posterior ensemble of possible solutions. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh DispersionNegative Log-likelihoodVsMisfitlitmod2__rayleigh_disp_neg_log_likelihood_Vs_misfit_med_0850-0930RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Elevation (Median) - Version 1 (KY22)This grid provides the median elevation surface from the posterior ensemble of possible models. Measured in meters. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModPredictedElevationMisfitlitmod1__predicted_elevation_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Elevation (Median) - Version 2 (FR23)This grid provides the median surface heat flow field from the posterior ensemble of possible models. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModPredictedElevationMisfitlitmod2__predicted_elevation_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Geoid Anomaly (Median) - Version 1 (KY22)This grid provides the median geoid anomaly surface from the posterior ensemble of possible models. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModMisfitPredictedGeoidlitmod1__geoid_predicted_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Geoid Anomaly (Median) - Version 2 (FR23)This grid provides the median geoid anomaly surface from the posterior ensemble of possible models. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModMisfitPredictedGeoidlitmod2__geoid_predicted_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Heat Flow (Median) - Version 1 (KY22)This grid provides the median surface heat flow field from the posterior ensemble of possible models. The grid is a product of the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModHeat FlowPredictedMisfitlitmod1__heat_flow_predicted_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Heat Flow (Median) - Version 2 (FR23)This grid provides the median surface heat flow field from the posterior ensemble of possible models. The grid is a product of the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModHeat FlowPredictedMisfitlitmod2__heat_flow_predicted_medRectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 100.0s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 100.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0909-1000RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 102.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 102.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0930-1020RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 111.1s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 111.1s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_1000-1111RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 113.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 113.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_1020-1130RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 125.0s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 125.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_1111-1250RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 142.9s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 142.9s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_1250-1429RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 166.7s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 166.7s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_1429-1667RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 20.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 20.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0180-0200RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 22.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 22.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0200-0220RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 24.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 24.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0220-0240RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 25.0s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 25.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0220-0250RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 26.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 26.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0240-0260RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 27.8s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 27.8s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0250-0278RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 29.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 29.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0260-0290RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 30.3s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 30.3s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0278-0303RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 31.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 31.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0290-0310RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 33.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 33.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0310-0330RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 33.3s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 33.3s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0303-0333RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 35.7s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 35.7s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0333-0357RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 37.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 37.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0330-0370RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 40.0s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 40.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0357-0400RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 41.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 41.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0370-0410RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 45.5s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 45.5s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0400-0455RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 47.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 47.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0410-0470RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 50.0s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 50.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0455-0500RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 51.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 51.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0470-0510RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 55.6s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 55.6s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0500-0556RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 57.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 57.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0510-0570RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 62.5s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 62.5s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0556-0625RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 64.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 64.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0570-0640RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 66.7s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 66.7s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0625-0667RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 68.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 68.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0640-0680RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 71.4s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 71.4s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0667-0714RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 73.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 73.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0680-0730RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 76.9s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 76.9s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0714-0769RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 79.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 79.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0730-0790RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 83.3s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 83.3s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0769-0833RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 85.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 85.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0790-0850RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 90.9s period - Version 1 (KY22)This grid provides median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 90.9s period. The grid is a member of the series of Rayleigh phase velocity grids in the KY22 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147315.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod1__rayleigh_disp_predicted_Vs_0833-0909RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0Predicted Rayleigh phase velocity at 93.0s period - Version 2 (FR23)This grid provides the median Rayleigh phase velocity (Vs) from the posterior ensemble of possible models at 93.0s period. The grid is a member of the series of Rayleigh phase velocity grids in the FR23 release of modelling of the structure and composition of the lithospheric mantle at an Australian continental scale using the LitMod platform. For more information see https://dx.doi.org/10.26186/147926.Deep Lithospheric StructureLitModRayleigh Phase VelocitiesPredicted Vslitmod2__rayleigh_disp_predicted_Vs_0850-0930RectifiedGridCoverage111.0 -46.0155.0 -9.0111.0 -46.0155.0 -9.0