{ "layers": [ { "currentVersion": 10.91, "id": 0, "name": "SolarPhotovoltaic_CapacityFactor", "type": "Raster Layer", "description": "Solar Photovoltaic capacity factor map of Australia. The minimum capacity factor is less than 10% and the maximum is 25%. The map is derived from Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018).", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": true, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 1, "name": "ConcentratedSolarPower_CapacityFactor", "type": "Raster Layer", "description": "Concentrated Solar Power capacity factor map of Australia. The minimum capacity factor is 52% and the maximum is 62%. The map is derived from Bureau of Meteorology (2020) data. Minimum exposure cut-off values used are from International Renewable Energy Agency (2012) and Wang (2019). The scientific colour map is sourced from Crameri (2018).", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 2, "name": "Wind_150mHubHeight_CapacityFactor", "type": "Raster Layer", "description": "Wind (150 m hub height) capacity factor map of Australia. The minimum capacity factor is less than 15% and the maximum is 42%. The map is derived from Global Modeling and Assimilation Office (2015) and DNV GL (2016) data. The scientific colour map is sourced from Crameri (2018).", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 3, "name": "Wind10percent_Solar90percent_AS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 10% : solar 90%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is less than 25% and the maximum is 64%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on an absolute scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 4, "name": "Wind20percent_Solar80percent_AS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 20% : solar 80%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is less than 25% and the maximum is 64%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on an absolute scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 5, "name": "Wind30percent_Solar70percent_AS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 30% : solar 70%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is less than 25% and the maximum is 64%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on an absolute scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 6, "name": "Wind40percent_Solar60percent_AS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 40% : solar 60%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is less than 25% and the maximum is 64%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on an absolute scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 7, "name": "Wind50percent_Solar50percent_AS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 50% : solar 50%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is less than 25% and the maximum is 64%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on an absolute scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 8, "name": "Wind60percent_Solar40percent_AS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 60% : solar 40%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is less than 25% and the maximum is 64%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on an absolute scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 9, "name": "Wind70percent_Solar30percent_AS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 70% : solar 30%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is less than 25% and the maximum is 64%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on an absolute scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 10, "name": "Wind80percent_Solar20percent_AS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 80% : solar 20%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is less than 25% and the maximum is 64%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on an absolute scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 11, "name": "Wind90percent_Solar10percent_AS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 90% : solar 10%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is less than 25% and the maximum is 64%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on an absolute scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 12, "name": "Wind10percent_Solar90percent_RS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 10% : solar 90%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is 3% and the maximum is 29%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on a relative scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 13, "name": "Wind20percent_Solar80percent_RS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 20% : solar 80%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is 8% and the maximum is 34%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on a relative scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 14, "name": "Wind30percent_Solar70percent_RS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 30% : solar 70%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is 13% and the maximum is 42%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on a relative scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 15, "name": "Wind40percent_Solar60percent_RS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 40% : solar 60%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is 20% and the maximum is 52%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on a relative scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 16, "name": "Wind50percent_Solar50percent_RS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 50% : solar 50%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is 25% and the maximum is 64%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on a relative scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 17, "name": "Wind60percent_Solar40percent_RS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 60% : solar 40%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is 20% and the maximum is 59%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on a relative scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 18, "name": "Wind70percent_Solar30percent_RS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 70% : solar 30%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is 15% and the maximum is 55%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on a relative scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 19, "name": "Wind80percent_Solar20percent_RS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 80% : solar 20%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is 12% and the maximum is 51%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on a relative scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true }, { "currentVersion": 10.91, "id": 20, "name": "Wind90percent_Solar10percent_RS", "type": "Raster Layer", "description": "Hybrid Wind and Solar capacity factor map of Australia - wind 90% : solar 10%. The map shows the capacity factor available for electrolysis. Wind and solar plants might be oversized to increase the overall running time of the hydrogen plant allowing the investor to reduce electrolyser capital expenditures for the same amount of output. Calculations also include curtailment (or capping) of excess electricity when more electricity is generated than required to operate the electrolyser. The minimum capacity factor is 10% and the maximum is 48%. The map is derived from Global Modeling and Assimilation Office (2015), DNV GL (2016) and Bureau of Meteorology (2020) data. The scientific colour map is sourced from Crameri (2018). Layer is displayed on a relative scale.", "geometryType": null, "copyrightText": "© Commonwealth of Australia (Geoscience Australia) 2021. This product is released under the Creative Commons Attribution 4.0 International Licence. http://creativecommons.org/licenses/by/4.0/legalcode", "parentLayer": null, "subLayers": [], "minScale": 0, "maxScale": 0, "defaultVisibility": false, "extent": { "xmin": 111.994998809, "ymin": -43.94499852898, "xmax": 153.944998809, "ymax": -9.994998528979998, "spatialReference": { "wkid": 4326, "latestWkid": 4326 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeNone", "displayField": "", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": null, "geometryField": {}, "indexes": [], "subtypes": [], "relationships": [], "canModifyLayer": false, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query", "supportsStatistics": false, "supportsAdvancedQueries": false, "supportedQueryFormats": "JSON, geoJSON", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": false, "supportsHavingClause": false, "supportsCountDistinct": false, "supportsOrderBy": false, "supportsDistinct": false, "supportsPagination": false, "supportsTrueCurve": false, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": false }, "dateFieldsTimeReference": null, "supportsCoordinatesQuantization": true } ], "tables": [] }